FA-2317-8 BENT TIP

Part #: 167-0060

Standard Double Bend Electrodes are an economic solution to weld in a tight area or hard to reach area such as a flange or corner. This part has water cooling all the way to the nose which may enable them outlast cast or forged tips with a similar geometry.

RMWA Class 2 (C18200) material - a copper, chromium material recommend for high production operations spot welding hot or cold rolled steels, galvanized and coated materials.

The overall length is 1.50 IN
The outside diameter is 0.375 IN
The part mounts via a 3RW standard taper.
The A nose or Pointed face tip is a general purpose weld face suitable for most spot welding applications.
The weld face is 0.125 IN
The offset is 0.44 IN

See ways to use this part

Click the video title to watch on YouTube

Tuffaloy Double Bend Electrodes in a Channel

Specifications

RWMA Material Type	RWMA Class 2 - C18200
RWMA Taper	3RW
Nose Type	A
Overall Length	1.50000
Outer Diameter	0.37500
Welding Face Dia.	0.125
Offset	0.4375
Taper to Bend Length	0.6000
Bend to Nose Length	0.6000
Unit of Measure	IN